micro balance india

Microbalances To Weigh The Millis

What is the lightest possible thing that you can think of weighing? Well here’s a device that can even measure the weight of the air we breathe.

What is a microbalance?
The microbalance is a device that is used to measure weights that are as light as a millionth of a gram. Hence, it can be used to measure the weight of aerosol particles too. This is extremely sensitive, compared to the analytical balance we have used in our school chemistry labs, that reads up to the sub-milligram range. Needless to say, this device must be very sensitive to be able to measure such small quantities with accuracy.

Reproducibility of a microbalance:
The reproducibility of any instrument is its ability to give the same measured value over and over again for the same sample. The difference between these readings, called the standard deviation, must be minimized in order to say we have a stable measuring device.

Some of the factors that can affect your microbalance reproducibility:
Variations in temperature and pressure are enough to cause a change in the readings of the microbalance and most microbalance manuals advise a day of ‘acclimatization’ after being installed in a lab. That is to say, it must be given a day to come to terms with the conditions of temperature, pressure, and humidity in your lab and to become stable in the given environment.

Vibration as a factor that can affect microbalance performance:
Instruments as sensitive as the microbalances are also easily affected by vibrations within the lab. The vibrations from the walls and floors or from other instruments sharing the same table can cause considerable errors in measurement, reducing the capability of the balance to make precise measurements for your lab.

Hence, it is highly recommended that the microbalance in a lab be placed on a vibration free table and away from any walls, in order to minimize the effect of external vibrations on it.

How we can help you:
We at www.antivibrationtable.com, are here to provide you with these tables that can protect your microbalance, as well as any other device in your lab that incorporates a microbalance into it. We make tables that resist the vibrations within the lab due to internal as well as external factors and hence make your lab readings more accurate. To know more about anti-vibration techniques suitable for your lab, contact us through our web page at www.antivibrationtable.com or give us a ring at +91 9393728474.

Laboratory Analytical Balance

What is a Standard Micro Balance

The standard micro balance will usually provide precise measurements up to 22g. When you want overall performance and quality in order to obtain consistent and reliable small mass measurements, a standard micro balance will most likely be the right option for you.

The primary factors that you need to compare among standard micro balances are:

– Capacity

– Readability

– Response time

– Repeatability

You also want to look at things like user-friendliness and how easy the balance is to clean and maintain.

What are the pros of using a standard micro balance?

A standard micro balance will give you exact measurements when weighing very small amounts. You can increase the services offered in your lab simply by adding a standard micro balance. Weighing small samples is impossible on regular scales. By investing in a micro balance, you can ensure that your small measurements are always right the first time. Avoid transfer errors and save your lab a lot of money, especially if you are handling expensive materials.

What are the cons of using a standard micro balance?

With a standard micro balance, you wont be able to obtain the lowest possible measurements. There are balances out there that can support an even lower weight capacity than an average micro balance can. While this might be considered a limiting factor to some people, a standard micro balance might provide you with all the functionality you need.

www.antivibrationtable.com provides working platforms for all types of balances. We offer different options to choose ranging from MS powder coated, SS 304, perforated top, etc. For quotes, specifications or to discuss your unique application needs, please use our contact webpage or call us at +91 9393728474.

Top