Better Balance for your Analytical Balances

Analytical balances are also called ‘lab balances’ and are used for weight measurement in the milligram range. Needless to say, the sample size is extremely small and needs to be handled with extreme care to get good results. A small shake or vibration can cause spillage of the sample or a redistribution of the same which can significantly affect the results.

These are extremely sensitive devices and they can yield an accuracy of up to 4 decimal places. To maintain their efficiency and accuracy, good balances must be calibrated at regular intervals. This maintains precision and also increases the overall lifetime of the balance.

Earlier, mechanical analytical balances that used actual weights to balance out the weight of sample were used. Today, the electronic analytical balance is more widely used. This balance does not use a mass, rather it generates a force that counters the weight of the sample, using an electromagnet. This force is then measured to calculate the weight of the sample.

Analytical balances are a part of almost every lab and today, and the competition between the brands that manufacture them is quite high. This also means a higher quality of the products in the market today. The devices now come with advanced features like LED screens for display, glass shields for protection from air currents and even direct printing of reports. The focus today is on an efficient, error-free device that can give accurate results.

Nowadays, report generation by the machine means that there is zero paperwork. This is a big plus for analytical balances today. Eliminating paperwork means less of the hassle and unnecessary human errors associated with it. However, the flip side is this: When reports are generated automatically, there are customized workflows that take place within the machine based on the measured value. Small vibrations from the environment can cause errors during weight measurement that get amplified in the workflow and contribute to a loss of accuracy in the final result.

Therefore, there is a need for a stable surface with minimal shocks or vibrations affecting the device during its performance. Most devices come with recommendations for using shockproof tables or surfaces to mount your analytical balances. This is where our anti-vibration tables come into play. We provide you with a table that notably removes the vibrations reaching your device. We also provide draft shields that help minimize the vibrations from an overhead ceiling fan or a draft or air current within the room.

We realize that each lab has unique needs and so we can help you by coming up with anti-vibration techniques specifically suited to your work environment. We at offer you a customized solution to your problem.

To know more about anti-vibration techniques suitable for your work environment contact us now through our web page or give us a ring at +91 9393728474.

anti vibration table mumbai

Our Goal Is To Help You In Generating Accurate Readings

We have over 14 years of experience serving many different companies in different industries. The broad range of anti vibration tables we supply, and support combined with the superior technical expertise and knowledge of our team, has allowed us to become an invaluable partner to organization in a wide range of industries. From Hyderabad, India we serve from our local and regional market, to the national and international markets.

Here are some of the industries that we serve:

  • Agriculture
  • Animal Husbandry
  • Beverage
  • Biotechnology
  • Chemical
  • Concrete & Cement
  • Education
  • Food Processing
  • Jewelry
  • Manufacturing
  • Medical
  • Petroleum
  • Pharmaceutical
  • Pharmacy
  • Retail
  • Science
  • Steel
  • Textile
  • Transportation

Services and Products

We sell, distribute, trade anti vibration tables for all makes and models of weighing balances. Our products are offered in multiple sizes and configurations to meet the diverse needs of the industry and their applications.


We focus on high quality anti vibration tables that require specialized industry expertise. Then we ensure that our products perform in each unique customer application. While we specialize in the science behind our products, our customers specialize in bringing their finished products to the marketplace.

Our goal is to help you in generating accurate readings during weighing balance operation every time.

Sleekly Anti Vibration Table

Sleekly Anti Vibration Table from LCGC LABS

Solid and sleekly styled anti vibration table from LCGC LABS offers a stable platform designed and developed exclusively to help nullify vibration during the operation of analytical balances, precision balances, micro balances, and ultra micro balances.

In the Laboratory or R&D or Medical or Healthcare or Industrial or Chemical or Pharmaceutical or Analytical or Biotechnology industries there are some variables that can create havoc on results provided by a weighing balance. Mitigating these environmental affects on balances isn’t always easy, but LCGC LABS balance table can help eliminate irregularities in measurements resulting from environmental affects.

Our anti vibration tables allow all types of balances to perform with accurate results irrespective of environment changes. All our balance tables are designed ergonomically with a scratch resistant jet black granite top. We offer different options to choose ranging from MS powder coated, SS 304, perforated top, etc.

For quotes, specifications or to discuss your unique application needs, please use our contact webpage or call us at +91 9393728474.


Chemical Weighing – Analytical Balance

In the pharmaceutical industry, accurate measurement of chemicals used in the advanced development of new and better drugs for humans has become absolutely the highest vital function. Measurements in tiny increments, in micrograms, may be necessary to enable chemists to research components found in nature that otherwise would be impossible if it were not for analytical balances.

Analytical balances have entered the digital age. Long gone is the triple-beam scale for the measurement of extremely tiny amounts. There may be extracts from plants foliage or even sea animals that are so small that only a digital analytical balance could detect them. The dire need for knowing these infinitely tiny amounts is necessary for understanding how they work in nature, and how they could possibly work for humankind.

Digital scales have been around for decades, but none is so sensitive than analytical balances, which have microchip control, enabling research scientists in the pharmaceutical field to know how much of a chemical to expect when extracting materials from a known natural resource. Analytical balances have a high sensitivity for this purpose, and are so sensitive that they need shielding from air currents that may form in the lab environment due to moving personnel. Such shielding should not interfere with the weighing platform, as this configuration is necessary for ease of use.

Some items, such as plant foliage or leaf material, may be weighed accurately first, giving the scientists knowledge of their mass before extracting compounds. After extraction, the compounds can be weighed, which can give vital data such as how much living tissue can produce a certain amount of the compound. This can be done easily with analytical balances, a necessary part of natural resource investigations.

LCGC LABS anti vibration tables are perfect match for these analytical balances. We have carved a niche in the market by offering Anti Vibration Tables with different sizes and materials (MS, SS 304, Perforated, etc).

For quotes, specifications or to discuss your unique application needs, please use our contact webpage or call us at +91 9393728474.

Balance Table for Analytical Purposes

Choosing a Balance Table for Analytical Purposes

Balance Tables use for analytical purposes for highly accurate weighing samples within the laboratory environment. They are incredibly important in a wide range of industries and applications and can be highly specialised.

As such, any lab manager choosing a new analytical balance table must do so wisely.

There are many things he must consider before a purchase, and these are outlined below.


One of the most obvious issues when choosing any new piece of lab equipment is the cost. Labs run under tight budgets and have to ensure anything they buy offers value for money.

However, the purchase should not be seen in simple price terms alone. Investing in a high quality analytical balance table can be very worthwhile in the long run, so the initial high outlay should not be seen as a negative factor.

Instead, view the purchase in terms of value for money: is the cost justifiable in terms of results and improvements in performance and quality that it will bring.


Depending on the situation the analytical balance table is to be used in, accuracy can be a deciding factor.

Many balances are accurate to 0.01 milligram. Alongside this, it should be considered how reliable the measurement is. There is no point having an accurate reading if the measurements are not consistent.


All lab equipment needs to be reliable so that scientists know they do not have to worry about breakdowns or downtime.

Check the reputation of the company that makes and sells the analytical balance tables and consider the maintenance required and after-sales support available.

With more than 20 years of experience in the industry, our FREE, 24/7 Tech Support hotline is a trusted resource for thousands of customers just like you.

For quotes, specifications or to discuss your unique application needs, please use our contact webpage or call us at +91 9393728474.

Laboratory Analytical Balance

How to Correctly Use a Laboratory Analytical Balance

Analytical balances have become one of the most important pieces of scientific equipment within the laboratory or research space. By allowing weights to be determined to an incredible accuracy, of 0.1 mg or better, they have opened up many options for scientists and researchers, enabling experiments and tests that were previously not possible, or would not have given usable results.

However, having an accurate analytical balance in the lab is of no consequence unless it can be used properly. With the development of precision weighing equipment came a need to ramp-up skills and best practice. Without knowing how to make the most of these lab scales, scientists and researchers may as well not use them at all!

When a new lab balance is purchased or a new member of staff is employed, it is vital that they are properly set up and trained. Scientists must know all about using this specialist equipment and how to make the most of its features. And the balance should be correctly installed and then regularly cleaned, calibrated and maintained to ensure accuracy remains high.

Analytical balances should be set up in a draft-free area on a solid work surface that will not be affected by vibrations. Even the smallest shake or slightest incline will affect the results, potentially ruining entire experiments. The vibration isolation tables of LCGC LABS allow research instruments to maximize their accuracy by removing the 99 percent of unwanted vertical and horizontal vibrations. LCGC LABS manufacturers and exports Anti Vibration Tables.

Modern lab scales usually have built-in calibration masses, others must be re-set periodically with a standard mass. Before using each time, they should be zeroed and after this, even a slight change in the area can affect the reading. Placing samples on the scale should be done with tweezers, tongs or gloves, and hot objects should be cooled first.

Of course, any spills should be immediately cleaned up and when repeating weighings it is important to follow the same procedure each time.

Analytical balances are an important piece of lab kit and should be treated as such to ensure they give accurate readings that help, not hinder, experiments.

For quotes, specifications or to discuss your unique application needs, please use our contact webpage or call us at +91 9393728474.


Analytical Balances for Quality Control

Analytical balances are a key piece of laboratory equipment as they ensure accurate experiments can be carried out.

They are also vital for many other processes, such as quality assurance for injection moulded plastic components. There are many companies providing solutions for manufacturers that need a simple yet effective way to accurately weigh parts.

Random samples of freshly moulded parts from every production batch must go through a series of quality checks, including weighing. Each piece has a known correct weight, and this is one of the first things to be assessed. This requires a highly accurate and reliable analytical balance. Ten or more samples will be weighed and must fall within tightly defined tolerances, so the scale must not show any abnormalities.

LCGC LABS anti vibration tables are ideal solution for analytical balances requires 1,620g with 0.01g readability. The results must be incredibly accurate and reproducible, so the measurements can be depended on.

LCGC LABS high performance balance tables provide an excellent vibration free working surface for balanced loads up to 500 lbs. The robust construction means that environmental impact is kept to a minimum. LCGC LABS balance tables have become the preferred piece of weighing solution for a wide range of situations where accuracy cannot be compromised. They are found in all sorts of labs, manufacturing plants and testing stations in sectors from life sciences to electronics.

For quotes, specifications or to discuss your unique application needs, please use our contact webpage or call us at +91 9393728474.


Accurate Weighing in the Lab

In any chemical research laboratory, the need for high precision in instrument function, pipetting, and even weights and measures is vital for the constant reproducible results. As for reagent mixing and setup, weighing out reagent powders and liquids properly and with precise discipline is advantageous for accurate resulting. Weighing balances are needed for this function and the more precise the better.

There are many styles and types of analytical weighing balances. Triple beam scales has been and industry standard for decades, and they have been improved upon to an end, simply meaning they cannot be improved further. Triple beam balances have their uses, but without precision to thousandths of millimeters, say, they have a limited function for high-resolution precision.

Digitalizing the weighing balances in the laboratory has been one of the improvements that have come about in the last several decades. Adding a computer chip to analytical balances has led the way to better testing replication and much more accurate and sensitive resolution for instruments. Computer microchips imbedded in balances and scales has made ultra-high resolution possible.

For the chemical research laboratory, especially in chemical industry, the requirement of accurate weights and measures cannot be more emphasized, as the products being developed and produced depend on the quality of the instruments used to produce them. Having accurate and specialized weighing balances in the laboratory environment can assure quality and precision during the development process. We at LCGC LABS designed and developed platforms to support these precision analytical balances. Our customized Anti vibration tables combine a highly rigid damped table with an excellent vibration isolation system in one unique package.

Most chemical industries depend on laboratory scales and balances for all of their processes and the need for large volume weighing are available to the chemical industry. Digital lab products such as lab balances are on the front line of explicit dry measure and liquid handling. Without these meticulous instruments, the research and development of chemicals used in the world for other processes and product developments would be impossible.

For quotes, specifications or to discuss your unique application needs, please use our contact webpage or call us at +91 9393728474.

Analytical Balances Pharmaceutical Lab

Analytical Balances in the Pharmaceutical Lab

Laboratory analytical balances are a vital part of the pharmaceutical industry. Weights and measures of all types must follow exacting standards in order to create a successful end product. A weighing analytical balance can provide for accurate weight measurements, which can also include quantification of solids, powders, or solutions.

An excellent lab balance can have certain properties that set it aside from all other weighing scales.  Ease of use is at the front line, but accuracy has to be the most important. Microchip control has brought the laboratory scales into the digital age, a long walk away from the standard triple-beam scales of yesteryear. Microchip control enables the balances to zero instantly, without error, assuring the technician doing the weighing that the balances are accurate to a tiny margin.

Some Laboratory scales are so sensitive that air currents can interfere with the results, thus driving manufacturers to provide shielding on their scales to prevent drafts from wreaking havoc on the weights measurements. This is a beneficial added feature of many good balances, and may come standard with the company you choose to be your scales provider.

Other important features for the digital balance should be an easy to read digital display, possibly backlit for ease of viewing in darkened laboratory environments. Tare balancing is an important configuration also, as it facilitates different container uses while weighing out materials. A sturdy platform for heavier or larger volumes may be necessary, and you can be sure there are many manufacturers of balances that have such configurations in their product lines.

Laboratory balances are found in every research and development labs for their precision dry measures and accurate item counting capability. You can be sure that the advancement and improvement of these scales has been accomplished, as the balances have entered the digital age.

LCGC LABS is pioneer in the field of designing and developing state-of-the art anti vibration tables, which provide the user with a truly vibration free environment for accurate weight measurements all the time.

For quotes, specifications or to discuss your unique application needs, please use our contact webpage or call us at +91 9393728474.


Operating Tips for Analytical Balances

Analytical balances are high precision laboratory instruments used to measure masses. They can give readings to an incredibly accuracy, allowing even small samples to be weighed down to thousandths of a gram.

In order to ensure they remain accurate and reliable, great care must be taken when setting up, operating and cleaning analytical balances in the lab.

Setting up an analytical balance

The balance should be set up on a stable anti vibration table where it will not be knocked or affected by vibrations. This means other equipment should not be used in the immediate area, and certainly not at the same time as the balance. There must be strict IQ/OQ protocols followed during installation and operation of anti vibration table. We at LCGC LABS having years of market knowledge and experience have enabled us to establish ourselves as a leading manufacturer and supplier of anti vibration tables.

Operating an analytical balance

Before each use, the balance should be zeroed so that the subsequent reading will be accurate. This may be done while the empty container is on the balance, if this is needed to measure the sample on. After pressing the zero or tare button it is important not to place anything on the bench or knock it, as this will affect the reading.

Items or samples to be weighed should be handled carefully with tongs, tweezers or gloves and placed with care on the balance. Even an oily fingerprint can affect the measurement, such is the level of precision offered by analytical balances.

Some balances feature an enclosed chamber for greater control over the environment in which the measurement takes place. If this is used, ensure optimum conditions are maintained throughout the process.

If taking repeated measurements as part of an experiment, ensure that each weight is taken in the same manner and recorded in the same format.

Maintaining an analytical balance

Keeping the analytical balance clean is vital. Dust, dirt or even a few skin cells will affect the measurement. The balance should be cleaned off after each use with a brush or cloth, and any residue completely removed.

Calibration will need to be carried out regularly, with intervals determined by the level of use. A standard mass should be used to ensure accuracy and reliability are maintained.

For quotes, specifications or to discuss your unique application needs, please use our contact webpage or call us at +91 9393728474.